Wear Resistant Panel
Wear resistant panel
Wear resistant panel is compounded by rubber sheet, flat or spherical tiles and steel plate through hot vulcanizing process. It is fixed to equipment surface by means of bolts connection or adhesive. There are two types of ceramic surface,: flat and spherical. Wear resistant panel is high wearable, high cut-resistant, and super impact wear resistance. It is magically suitable under condition of systems conveying lower burning point materials, and outstanding feature of powerful impact.
Series of wear resistant panel
· Rubber alumina ceramic panel
· Ceramic pulley lagging
· Two-In-one wear resistant/composite panel with CN layer
· ZTA wear resistant panel
· Polyurethane wear resistant panel
· Silicon carbide wear resistant panel
Data sheet (as reference only, different series, different result)
| Material Properties | Units | Value |
| Rubber | Tensile Strength | Mpa | 16 |
| Break Extension | % | 450-500 |
| Shore Hardness | - | 60±5 |
| Break Permanent Deformation | % | 30 |
| Main Composition | | Natural Rubber+SBR |
| Peel Strength between rubber and ceramic/rubber and steel | Mpa | 6 |
| Bonding Strength between rubber and ceramic | Mpa | 4 |
| Panel Size | 300x300, 200x200, 225x225, 250x250, 400x400, 425x425,500x500, 600x600 |
| Ceramic Size | Ceramic tiles are available from 10x10mm to 100x150mm; thickness
of ceramic tile can be from 1.5mm to 50mm |
| Backing Plate | Steel plate with thickness ranging from 3mm to 10mm(Optional) |
| Rubber Thickness | Depends upon the impact stress expected or customer requirement. |
| Remarks | Metal+Rubber+Ceramic/Rubber+Ceramic
Plain surface or Spherical surface. Studs also available upon request
Custom shapes can be made. |
| Name | Project | Unit | Index |
| Alumina Ceramic | Alumina Content | wt% | 292 |
| Density | g/cm3 | 23.6 |
| Hardness | HRA | N85 |
| Flexural Strength | 20"C, Mpa | N280 |
| Rubber | Fracture Toughness | 20"C,Mpa % | 3.65 |
| Thermal Shock Resistance | ATc,°C | 250 |
| Surface Roughness | um | V.9 |
| Water Absorption | 50.01 | >1.2 |
| Density | g/cm3 |
| Elongation | % | 500 |
| Tensile Strength | Mpa | 19.6 |
| Shore Hardness | HA | 60±5 |
| Peel Strength | Mpa | 212 |
| Temperature Range | •C | -40-120 |
| Density | g/cm3 | 21.05 |
| Polyurethane | Elongation | % | 500 |
| Tensile Strength | Mpa | 25 |
| Shore Hardness | HA | 85±5 |
| Steel | Carbon Steel Plate | Gpa | Q235B.A36 |
| Thickness | 3-10 |
| Bolt | High Strength Bolts | 4.8Z8.8 |
| Abrasion Resistance | P=74N. n=800rpm. t=30min | 0.0005g |
Advantage
· Extending the wear life for equipment
· Excellent impact resistance
· Excellent sound insulation
· Cost effective
· Customized size
· Reduce maintance cost and downtime
Photos show
